How To Solder Together Copper Tubes or Pipes In 5 Easy Steps

Most worthwhile projects or goals need a number of steps and perseverance as time passes in order to complete and accomplish. Anything the least bit complicated requires preparation, know-how and perseverance through several steps during a period of time. Aiming to solder together copper tubes or pipes is no exception. Here’s the best way to do just that in five simple steps.

Step 1.  This will be important because Dry fit the copper pipes together to ensure they will come together properly when you actually put heat to them. If you skip or ignore this step, it lessens the chance of a headache when soldering time actually comes around.

Step 2.  This can be a really important step that will need your full attention and concentration. You have to do it in this way: Use emery or sand cloth to clean the ends of the pipes. The reason you need this is Also, be sure to clean out the pipe fitting as well

Step 3.  The reason behind this is to Use soldering flux on the ends you just cleaned including inside the fitting Also, it’s good to ensure a good solder.

Step 4.  To elaborate on that a little bit, Connect pipes and fitting together and apply heat.

Step 5.  Additionally, Apply the solder to one pipe to fitting connection at a time.

At the conclusion, when you have stuck with the above mentioned tips all the way, you will have succeeded and now can settle-back and enjoy the benefits of your success. You ought to congratulate yourself and allow yourself to become satisfied and a bit proud. You achieved what you set out to do! Savor the sweet taste of success! Now take advantage of the fruits from your accomplishment!

If you decided not to follow the tips above, well, condolences are in order. Your chances to will be really low, a genuine “long shot”!

Be Sociable, Share!
This entry was posted in Weller Soldering How to Solder and tagged , , , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *